Remote support
1. Choose the download for your operating system:
2. Start the program and give your remote ID to the support employee.
BSSL (Brodos System Support Library)
1. Choose the download for your operating system
2. Install the program after the download finishes.
Driver for receipt printer
1. Choose the download for your operating system
2. Install the program after the download finishes.
Hint
Unpack all files in the Zip folder and then start "Autorun.exe". Follow the instructions on screen.
Drivers for the customer display
1. Connect the display to the PC.
2. Download the drivers.
3. Download the Virtual Memory Switch Manager.
4. Unpack both zip archives.
5. Install the printer drivers via the file "BCD_WIN_V1.1.0.exe".
6. During the installation you will be asked for the type Select "BCD-1100".
7. During the installation you will be asked for a port Select any port and click on "Configure Port".
7.1 If an error message appears, select a different port and try again.
8. In the window that appears, select "Hardware" under "Flow control" and continue with the installation.
9. After the installation and a PC restart, switch to the device manager by pressing the Windows key + X and clicking on "Device Manager".
10. Open the entries under "Ports (COM & LPT)".
11. Right click on "BCD-1100 USB Serial Port" and then click on "Properties".
12. Check here that the flow control is set to "Hardware" and note the COM port shown in the name.
13. Press the Windows key and type in "Printer". Select "Printer & Scanner".
14. Click on the BCD-1100 entry and click on "Manage".
15. Click "Printer Properties".
16. Select the "Ports" tab and check that the appropriate COM port is selected as in the Device Manager. If not, click on the correct port and check via "Configure" whether the flow control has the correct value "Hardware".
17. Accept the settings.
18. Start the Virtual Memory Switch Manager via the file "BCD_VMSM(V1.0.3a).exe".
19. Select the correct COM port and click on "Check communications".
20. Click on "Run manager".
21. click on "Get status".
22. Select the following settings.
Character code table: WPC1250 (Central European)
International character set: Germany
23. Click on "Set status".
24. The setup is complete. You can now select the display in brodos.net in the cash register settings.
Template for the document layout
1. Download the form.
2. Send the completed form together with your customer number and the information for which store the layout is to be stored to teamkiosk@brodos.de
Instructions for requesting the Authcode